Smart Master Coat


Heat proof and 100% Water proof coat

Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working. To prevent high heating of building it is necessary to thermal insulate the building structures.

High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure. Consequently cracks development takes place. Ultimately resulting water seepage  through cracks in rainy season.

Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously  damage or completely destroy more buildings & structures than war or natural disasters.

  • Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing
  • High drop in Internal temperature.
  • Reduces electricity bills used for cooling the building.
  • A more productive working environment without air conditioning.
  • You can walk on roof surface even in peak sun light.
  • Roof is protected from thermal shock due to varying sun load.
  • High crack bridging ability.
  • Remarkable elasticity to cope up with thermal expansion and contraction.
  • Environmentally safe and convenient to apply.
  • Non toxic food grade film after curing.
  • Roof and terrace water & heat proof coatings.
  • Solar heat proof paints.
  • High performance heat reflective paint, cool roof coatings, summer cool paint.


  • 100% Water Proofing
  • Up to 85 % Heat Proofing
  • Anti Rust
  • Anti Bacterial
  • Anti Fungal
  • Food Grade
  • Washable
  • Wear Resistant
  • High Adhesion
  • Saves Maintainance
  • Saves Energy 
  • Saves Oxidation
  • Saves Deterioration
  • Hygenic 
  • Saves Health
  • Maintain Aesthetics
  • No Wear & Tear
  • Highly Durable


Temperature Resistant Up to 95ºc
Water Proofing Excellent
Working Tempreture Above 18ºc
Thermal Conductivity Very Low (0.101 w/m2k approx)
Thickness of Coating 125-200 Micron
Adhesion No Peeling off
Solar Reflectivity 80-90%
Viscosity 21.5 Pa.s
Density 1.56 gm/cc
Coverage Area 16-22 sq. ft./ per kg
Composition Co-Polymer & Cross-link Polymers
Weather Proofing Excellent
Durability High
Over Coat Time 2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)
Complete Cure 72 hrs. @ 25ºC

Areas of Application

  • Terrace Water Proofing & Heat Proofing
  • Water Storage Tank Water Proofing
  • Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)
  • Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)
  • Roof / Terrace Garden
  • Factory sheds (Tin, Asbestos, Plastic)
  • Bathrooms / Kitchens
  • Plastic Water Tank Heat Proofing
  • A/C, Cooler Ducts
  • Water Proof Primer on Plaster

How to use or Apply



  • Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partcle.
  • Remove the existing paint layer/coating before application.
  • It is recommanded to use wire brush followed by sanding with emery.
  • Water wash the surface before samrt master coat application.


  • Mix/stir the material thoroughly.
  • Apply the first coat (SMC : Water = 2 : 1).
  • Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).
  • Confirm that after third or fourth coat the surface is opaque.
  • Let the final coat cure for 20-40 hours before use.

PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)

  • Apply first coat of Smart Master Coat (SMC : Water=2 : 1).  Wait for 10-20 minutes.
  • Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)
  • Apply the second coat of Smart Master Coat.
  • Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.
  • After waiting for next 20-30 minutes apply two or more coats.
Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.

Damp Proofing